Interstate Pneumatics WRCO2-K2, includes CO2 regulator, tank, recoil hose and a universal coupler.
All metal CO2 Regulator has a 0-125 PSI pressure range with a maximum inlet pressure of 1200 PSI with a safety burst disc rating of 1800 PSI. Fits standards CO2 paint ball cylinders. Comes standard with a pressure gauge, dial regulator knob & integrated steel belt clip.
Features:
G 1/2-14 Threads with O-Ring
Valve is made of LEAD-FREE brass
Kit Includes:
20 Oz CO2 Pin Valve Cylinder Tank Paintball
Warning:
CO2 can cause injury (suffocation and Asphyxiation) or death, ventilate the area before entering. CO2 is stored at very high pressure and a liquid CO2 is at cryogenic temperatures which can cause injury, burn, explosion, or death. CO2 should be handled by a trained professional and extreme caution should be taken when dealing with CO2. For safety always wear protective gear.
Note: This item does not ship with CO2 inside. It ships empty. You will need to take the tank to get it filled before use. If the tank leaks once you fill it the fill site will be able to determine if the burst disc needs replaced.
Note: These cylinders have inside protection cover of "Phosphate Filming Acid" which means these are good to use for beverages.
Details
More Info / Prop 65
Model Information
Interstate Pneumatics WRCO2-CL20 20 Oz. CO2 Pin Valve Cylinder Tank Paintball:
Interstate Pneumatics high quality aluminum CO2 cylinders with industry standard pin valves. DOT / TC Stamped. Safety Burst Disc Brass Pin Valve. The Valve is an American made valve with safety relief valve and blow off valve to protect from accidental discharge due to unscrewing valve (NEVER UNSCREW VALVE FROM CO2 CYLINDER). The cylinder is rated for 1800 PSI for DOT (Department of Transport) for use in the United States and TC (Transport Canada) for use in Canada. These cylinders are shipped empty as required by federal law, but are ready to fill. They have a current HYDRO test. Can be used for Paintball and other application, including dispensing beer or soda. For Beer and Soda applications correct pin valve style regulator is required.
Interstate Pneumatics 1/4 Inch Universal Steel Coupler x 1/4 Inch Female NPT. These couplers are interchangeable with the Universal Standard series couplers produced by other manufacturers. Precision machined from solid steel bar stock which provides longevity during mechanical shock in rugged applications. Maximum working pressure 300 PSI.
Features:
Steel body Zinc Plated to prevent corrosion
Interchangeable with other Universal couplers
Check Valve, forged steel
Specifications:
Body: Steel, Zinc plated
NPT size: 1/4" NPT Female
Temperature: -40 °F to 212 °F
Type: Universal
Seals: Buna-N (Nitrile)
Spring: Stainless Steel
Ball Bearing: Quantity 6, stainless steel
Interstate Pneumatics Polyurethane Coil Hoses are made from a special super tough compound for consistent performance. These hoses provides you with the highest quality and the most extensive offering of hosing in the industry. We have in-stock hosing customizing sizes, lengths, and colors in single or multi-spiral hose without requiring large set-up charges or minimum runs.
Interstate Pneumatics HR14-012 Features:
High kink resistance - virtually undamaged by twisting or crushing
Extreme flexibility - stretch 25% more than nylon hoses of the same length
Excellent cold resistance - to temperature as low as -40° F
Superb abrasion resistance - 6-10 times more than nylon or rubber hose
Chemical resistance - Gasoline, oil & ozone resistance
Interstate Pneumatics HR14-012 Specifications:
Hose Length: 12'
Stored Length: 6"
Working Length: 8'
Working Pressure: 125 PSI
Burst Pressure: 375 PSI
Safety Factor: 3:1
Fitting Size: 1/4" NPT
Fitting Type: Solid
The cylinder and regulator are not for oxygen service or use.
Includes
CO2 Regulator (WRCO2)
20 Oz Aluminum CO2 Pin Valve Cylinder Tank Paintball (WRCO2-CL20)
1/4" 12 Ft. Yellow Polyurethane Recoil Hose (HR14-012)
WARNING